AML M3000 Guia do Utilizador descarregar pdf (Página 26)

American Microsystems, Ltd. M5000 Portable Data Terminal

Termination Override

—

if a control character or special character (Func, arrow, etc.) is

embedded in the bar code data, the preamble, postamble and termination character is not

transmitted. Default is set to off.

Preamble

—

is a set of user-defined characters and transmitted at the beginning of the bar

code data. To define the preamble, enter ASCII characters. This option is active only during non-

portable mode. This field can include 0-32 characters, alpha, numeric and all ASCII characters.

Preamble Send Delay

—

is an option that specifies the amount of delay occurring

after the bar code preamble is transmitted. The delay period is programmable from 0.0 to 9.9

seconds, default is 0.0 seconds.

Postamble

—

is a set of user defined characters and transmitted at the end of the bar

code data. To define the postamble, enter ASCII characters. This option is active only during

non-portable mode. This field can include 0-32 characters, alpha, numeric and all ASCII

characters

Postamble Send Delay

—

is an option that specifies the amount of delay occurring

after the bar code preamble is transmitted. The delay period is programmable from 0.0 to 9.9

seconds, default is 0.0 seconds.

Bar Code Edit

—

the editing option must be checked for editing options to be

operational.

Editing

—

enables bar code editing.

Space Strip

—

refers to bar code leading and trailing spaces to be stripped or removed

from the data. (Editing must be on.)

Leading Strip

—

refers to the number of bar code characters (0-30) to be stripped or

removed from the beginning of the bar code data.

Trailing Strip

—

refers to the number of bar code characters (0-30) to be stripped or

removed from the end of the bar code data.



Note: If the total number of strip characters (leading and trailing) is greater than the number of

characters in the bar code, no characters are stripped.

Code

—editing can either apply to all or one bar code type. The default is All bar code types.

Bar Code Beeper

—

when you scan a bar code the M5000 PDT emits a beep. The

following settings allow you to set the tone and length of the beep.

Tone

—

sets the volume of the beep

Select one of the following options:

None

Low

Medium (default)

High

Length

—

sets the length of the beep. Select one of the following options:

Shortest

Short (default)

Long

Longest

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 37 38

Comentários a estes Manuais

Sem comentários

AML M3000 Guia do Utilizador Página 26

Comentários a estes Manuais

Manuais e produtos relacionados com Leitores de códigos de barras AML M3000