AML M3000 Guia do Utilizador descarregar pdf (Página 101)

7Communications

7-7

INCREMENT. In this mode, PCOM will create a new file for each received file. The user

specifies the filename, and a three digit starting extension. Each file will have the same filename,

but the extension will be incremented after each received file.

When sending or receiving files from the M3000, the interface must be directly connected by a

NULL Modem cable, or if the user wants to receive files from the M3000 via a modem, then the

AUTO RECEIVE function must be used.

The user is prompted for the filename to be sent or received. After the filename is entered, the file

transmission begins. During the file transfer, the user may abort the transfer by pressing the Escape

key at any time.

NOTE: Before sending or receiving files, make sure that all setup options are set correctly to

match the options of the M3000.

AUTO RECEIVE. The Auto Receive function provides the capability to receive files from the

M3000 in an unattended mode. The Auto Receive function will receive multiple files from the

M3000 without user intervention. PCOM will create a log file (LOG.TXT) that will provide

statistics of the file transfers. The auto receive function supports a DIRECT connection to the

M3000 by a NULL Modem cable, and also supports a HAYES compatible MODEM. When using

a modem, PCOM will automatically:

1. Answer each incoming phone call automatically and switch to the connection speed

of the incoming call.

2. Initiate a file transfer when using XMODEM, or wait for data in the other protocols.

3. After the transfer is completed, Make an entry in the log file and go back to Step 1.

The File Mode option in the SETUP function determines how each file will be processed by

PCOM.

While in APPEND mode, PCOM will append each incoming file to the same filename.

While in INCREMENT mode, each file will be received in a separate filename. The user specifies

the filename, a three digit starting extension. Each file will have the same filename with a different

extension. After each file is received, the extension is incremented.

NOTE: Because three digits are incremented for a unique filename in the INCREMENT mode,

the user must process the files before 999 files have been received.

Before using the AUTO RECEIVE function, make sure that all setup options are set correctly to

match the options of the M3000. Also make sure that the Auto Receive Section options are set to

your preference.

SOFTCOM Keyboard Emulation Software

SOFTCOM is a memory resident PC program which allows data received from the serial port to

appear as direct keyboard input. SOFTCOM may be used with a bar code reader, or any serial

output device.

Once SOFTCOM receives data from a serial port, it will make the data appear as keyboard input.

SOFTCOM should work with most well behaved programs, but may not work with programs

which modify the COM port settings, or programs that intercept keyboard input. SOFTCOM

supports a wide range of serial port options and also supports flow control via the XON/XOFF

protocol.

SOFTCOM Kill Program

The SOFTCOM kill program will unload SOFTCOM from memory. This same function may be

performed from the Configuration program, but is also included as a standalone program, so that it

1 2 ... 96 97 98 99 100 101 102 103 104 105 106 ... 155 156

Comentários a estes Manuais

Sem comentários

AML M3000 Guia do Utilizador Página 101

Comentários a estes Manuais